Carrot produced in all seasons and can be consumed as fresh, cooked, boiled, garnish, juice and pickles. There is a great variation in carrot color from light yellow to dark purple-black. Because of the dark purple-black color and the high anthocyanin content, ‘Ereğli Siyahı’ cultivar is commonly used in the industry. However, ‘Ereğli Siyahı’ has wide variation within its population. In this study, the difference among the phytochemical content of ‘Ereğli Siyahı’ sampled grouped based on their interior color has been examined. Carrot roots grown in same field in Eregli, Konya were sampled and collected. Marketable 700 roots were from ‘Eregli Siyahı’ were randomly sampled. Then, the roots were cut in half and separated 11 different groups (G) according to the interior color. Each group was homogenized in 4 replications and samples were prepared for analysis of phytochemicals. Results of the study showed that G7 had the highest phenolic content (1199.23 µg GAE/g fw) while G5 was the group that had the lowest phenolic content (516.54 µg GAE/g fw). Antioxidant capacity was determined using TEAC ve FRAP methods. The highest TEAC (8.54 µg TE/g fw) and FRAP (15.52 µmol TE/g) were observed in G2. However, the lowest TEAC (2.09 µmol TE/g) and FRAP (1.62 µmol TE/g) were found in G5. The percentage of carrot roots was the highest in G2 (%35). The results indicated that there is a great deal of variation for several phytochemical traits within “Ereğli Siyahı”.

Greenhouse construction projects need to consider local climate characteristics, production type in the greenhouse and materials used for the physical structure and glazing. A major share of commercial greenhouse manufacturers in Turkey produce turnkey greenhouse projects either using by trial and error method or imitating/reproducing greenhouse imported from other countries. Improperly designed projects may result in greenhouses having weak construction or more expensive structures due to using unnecessarily larger profiles which consequently cause a loss the profits for the growers. This study aims to contribute to the improvements and overcome the gaps in practice of greenhouse projects by designing a software for an expert system that utilizes an accurate Project considering them and mandatory buildings standards of Turkish Standardization Institute (TSE). The expert system, named SERASİM, has been developed within the framework of the present MSc. Thesis and enables calculating each part of the construction system of a gable roof glass house according to TSE standards. Besides calculations for statics, dynamics and strength as well estimating the bill of quantity, SERASİM can be utilized to determine the heating requirements and costs for selected locations and crops. SERASİM may also be used as a teaching tool for courses including greenhouse design, protected cultivation and greenhouse acclimatization.

Barley, as animal feed, raw material for malting and human food, constitute an important part among cereal sources in the world. Majority of barley that produced both in Turkey and other countries of the world, is being used as animal feed. Poor baking quality, taste and appearance of barley restricted its use in human nutrition. However, recently high protein, fiber, especially β-glucan and high starch content appeal to food industry. Many scientific researches established that β-glucan, a soluble fiber, has an effect in healing coronary-hearth diseases, lowering blood cholesterol level, balancing blood sugar level, preventing obesity. Being a healthy cereal that can be used in various purposes, and an additive in many food products, barley is considered a very promising cereal, and research to increase possibilities of its use in human nutrition is being increased. In the literature, there has been researches on making noodles, bulgur, kavut (roasted cereal), breakfast cereals. In this study the researches relating to evaluation of barley, importance of which is increased every day, as human food was reviewed.

In order to study the quantitative variability of malting quality-related traits and to determine the genomic locations which control these traits, an experiment was conducted using one hundred fifty double haploid (DH) lines of barley and their two parents ‛Steptoe’ & ‛Morex’. Protein content (%) was measured using Kjeldahl method, diastatic power calculated with Lintner formula, Malt extract was measured for each by special weight achieved and based on Malt Berix Charts. Transgressive segregation in both directions was observed for all traits. Genetic map is fairly saturated and comprising 327 RFLP markers with a total length of 1226.3cM with an average marker spacing of 3.75cM. Seventeen QTLs by LOD≤2(LRS≤9.21) controlling different studied traits were identified for all studied traits. Total phenotypic variance explained by these QTLs varies from 23.2 to 45.05%. Highest LOD scores were obtained for QTL’s controlling diastatic power (Qdip3Ha) on chromosome 3H, and lowest LOD scores were obtained for QTL’s controlling seed yield per plant (Qsyp1Hb) on chromosome 1H. Therefore gain through marker-assisted selection (MAS) in this population would be limited and some of the “Steptoe× Morex” population was developed with the intention of isolating and advancing barley lines for release to the malting quality.

Requirement simple technology, low production costs, lack of polluting effects and reliability in terms of health of it is the most important advantages of edible films. Chitosan that extend the shelf life of food and increase the economic efficiency of packaging materials is one of the new materials used for edible films. Chitosan was obtained by deacetylation of chitin which is the most commonly occurred polymer after cellulose in nature, in shells of arthropods such as crab, shrimp, lobster and in cell walls of some bacteria and fungi. Chitosan has the important bioactive properties such as hemostatic, bacteriostatic, fungistatic, spermicidal, anticarcinogenic, anticholesteremic, antacids, antiulcer, wound and bone healing accelerator and stimulating the immune system. As well as these features, the film forming and barrier properties of its, chitosan is made the ideal material for edible films and coatings in antimicrobial characters. Especially, in the protection of qualities and the improving storage times of fruits and vegetables, have been revealed the potential use of chitosan. The coating food with chitosan films reduces the oxygen partial pressure in the package, maintains temperature with moisture transfer between food and its environment, declines dehydration, delays enzymatic browning in fruits and controls respiration. In addition to, chitosan are also used on issues such as the increasing the natural flavour, setting texture, increasing of the emulsifying effect, stabilization of color and deacidification.

This study was conducted to determine the current status of dairy cattle farms in Niğde, to detect basic priority problems and to offer some solutions. In the study, representing all provinces, total 95 dairy farms selected by stratified and random sampling method was taken. The data obtained from the surveys in farms, face-to-face was used. The results showed that the large portion of dairy cattle breeders (60%) were primary school graduates, the average duration of cattle breeding was 15.2 years, a significant proportion of labor (92%) of family labor was used, 54%, 19%, 15%, 6%, 4% and 2% of farms reared only Holstein, Holstein and Simmental, only Brown Swiss, only Simmental, Holstein and Brown Swiss, and Simmental and Brown Swiss respectively, the average number of animals per farm was 33, the number of dairy cows was 13, the average daily milk yield per lactating cow was 16.6 kg. Farmers agreed that the most important problems were the high cost of basic inputs, concentrated feed problem, low cost of products sold, roughage and pasture problem. In addition, according to Likert scale, the most satisfied activities were reared cattle breed (3.95), breeder’s organization services (3.94), milking process (3.76), calving and maintenance duties (3.74) and recording system (3.71). Beside, for the breeders, the worst issues were satisfied that Ministry policies about cattle breeding (1.83), sales price and the market situation of animals (1.96), sales price and the market situation of the milk (2.04), provision of essential inputs such as feed and labor costs (2.06), credit and financial support (2.08).

Distance from the highway to the effect of heavy metal accumulation in bee products in order to investigate in this study; four different apiaries which have four km interval have been established from Tokat-Turhal highway side towards the north. Each station of a total 9 of 36 units bee colonies were placed. Honey, pollen and propolis samples were taken from these colonies in the months of April-July in 2009. The obtained samples (copper, zinc, iron, cadmium, chromium, lead and heavy metals such as manganese) content were investigated. According to the distance from the highway in honey samples averages of zinc, iron, chromium and manganese, there was no statistical difference between averages, while averages of copper, cadmium and lead were found significant differences between the averages. In the pollen samples, averages of zinc, iron, cadmium, chromium and manganese indicated no statistical difference between the averages, while, averages of copper and lead were found to be statistically significant. İn the Propolis samples, averages of copper, zinc, iron, chromium, lead and manganese determined no statistical difference between the averages, significant differences were detected between the averages of cadmium. Cadmium accumulation in the maximum occurs at the edge of the highway, the maximum accumulation of other metals have been seen in other stations When considering, due to traffic only metal cadmium at a level that considered as important in bee products be said to constitute pollution.

The Central Anatolia Region is one of the seven geographical regions which are 151 thousand square meters of surface area and it is about 21.0% of Turkey's land area. The population rate of cattle breeds in the Central Anatolia Region is 20.4% exotic cattle breeds, 19.1% crossbred, 11.6% native cattle breeds and total 18.1% in Turkey. The Central Anatolia Region cattle population is consists of 43.9% of exotic breed, 43.5% crossbred and 12.6% the native cattle breeds. The population of exotic cattle breeds (69.5%) in Nigde province is the first place and followed by Eskisehir provinces rate of 65.6% in the Central Anatolia Region. The rate of crossbred cattle population is the highest rate (65.0%) province of Sivas and followed by Çankırı province (62.8%). Ankara and Yozgat province has the highest rate of native cattle breed 28.3% and 25.5%, respectively. The total populations of cattle breeds in Konya and Kırıkkale provinces were found maximum 518.291 cattle and minimum 45.426 cattle, respectively, in the Central Anatolia Region. The population rate of exotic and crossbred cattle breeds has increased 67.0% and 11.8%, respectively, while population rate of native cattle breeds has decreased 30.3% from 2007 to 2011 in the Central Anatolia Region. The 20.1% of sheep, 8.2% of goat and 18.3% rates of total livestock population in Turkey are in the Central Anatolia Region. The population rate of sheep and goat of the Central Anatolia Region is 20.1% and 9.5%, sheep and goat respectively and 18.3% total in Turkey. The 70.9% for Angora goats, 8.2% hair of goats, and 17.7% indigenous of sheep breeds and 66.0% crossbreed to national Sheep and Goat population has risen in the Central Anatolia Region. All of these results are evaluated, Central Anatolia Region, Turkey, the contribution of animal products grown by population of cattle and small ruminants is important and can be considered a center of attraction for investment in animal breeding

This study contains the yield evaluations on oilseed crops cultivation in TR71 region, which contains Niğde Kırşehir, Aksaray, Niğde and Nevşehir provinces and is also known as Ahiler Development Agency. Effects of climate change on oilseed crops based on climate projections of the next 30 years was have been analyzed. Changes in surface temperature values and precipitation amounts for the period of 2011-2041 have been evaluated seasonally and annually with the corresponding values of 1961-1990(RF). Based on the RegCM3-ECHAM5-A2 scenario, the average temperature is expected to increase 0.2-0.6 Co until 2041. The smallest temperature change is predicted to occur in spring season where the greatest temperature change (0,6-0,8C°) is expected to occur in summerand autumn season. The changes in total annual precipitation amounts had generally increase tendency (5-25%) over the region especially in winter season30% increase rate was expected over Kırşehir, Aksaray and South part of Kırıkkale province. The changes in total autumn season precipitation amount is predicted to increase (20%) over Niğde but decrease (5%) over the south part of Kırıkkale and southwest part of Kırşehir and Aksaray province in autumn season. Considering the effects of the climate change in the next 30 years, agricultural production in TR71 region is in quite a good place compared to other part of Turkey but this change will indeed affect the agricultural potential of the region substantially. Annual temperature elevation will aggravate the plant temperature stress where increased evaporation will negatively impact the yield, increasing the pressure on the limited irrigation potential. Especially elevated temperature will negatively impact disc development during the seed formation period resulting in yield loss because of the feeble seeds on the disc and the increased disease susceptibility resulting from the cavitation in the inner parts of the disc.